Asus TS500-E4 PX4 TS500-E4 - Page 70
bracket
View all Asus TS500-E4 PX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
To remove the power supply unit (PSU): 1. Remove the chassis cover. Refer to section "2.1.1 Removing the side cover." 2. Lay the chassis on a flat, stable surface. 3. Locate the four screws on the rear panel. Remove the screws and set them aside. 4. Locate and remove the screws that secure the PSU bracket to the chassis. 5. Slide the bracket in the direction of the arrow and remove it from the chassis. 2-48 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-48
To remove the power supply unit (PSU):
1. Remove the chassis cover. Refer to section “2.1.1 Removing the side
cover.”
2.
Lay the chassis on a flat, stable surface.
3. Locate the four screws on the
rear panel. Remove the screws
and set them aside.
4. Locate and remove the screws
that secure the PSU
bracket to
the chassis.
5. Slide the bracket in the direction
of the arrow and remove it from
the chassis.