Asus TS500-E4 PX4 TS500-E4 - Page 44
Expansion cards
View all Asus TS500-E4 PX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.8 Expansion cards Refer to this section when installing expansion cards. Make sure to unplug the power cord before installing or removing expansion cards. Failure to do so may cause physical injury, and damage to the card and motheboard components! 2.8.1 Installing an expansion card To install an expansion card: 1. Lay the chassis on its side. 2. Locate the metal bracket opposite the slot you want to use. Remove the screw that secures the metal bracket to the chassis. Set aside the metal bracket for future use. 3. Align the card golden fingers to the slot and its metal bracket to the slot opening on the chassis. 4. Press the card firmly until it is properly seated on the slot. 5. Secure the card to the chassis with the bracket screw you removed earlier. 2-22 Chapter 2: Hardware setup