Asus TUF SABERTOOTH 990FX R3.0 SABERTOOTH 990FX R3.0 Users Manual English - Page 82
Chassis Fan 1-3 Profile [Standard], Water Pump Control [PWM mode], PUMP Fan Speed Low Limit [600 RPM]
View all Asus TUF SABERTOOTH 990FX R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chassis Fan 1-3 Profile [Standard] This item allows you to set the appropriate performance level of the chassis fan. [Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation. [Turbo] Sets to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following items appear only when you set Chassis Fan Profile to [Manual]. Chassis Upper Temperature [70] Use the and keys to adjust the upper limit of the chassis temperature. The values range from 40°C to 90°C. The chassis will operate at the maximum duty cycle when the temperature is higher than the limit. Chassis Lower Temperature [40] Displays the lower limit of the chassis temperature. Chassis Fan Max. Duty Cycle(%) [60] Use the and keys to adjust the maximum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature reaches the upper limit, the chassis fan will operate at the maximum duty cycle. Chassis Fan Min. Duty Cycle(%) [60] Use the and keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature is under 40°C, the chassis fan will operate at the minimum duty cycle. Water Pump Control [PWM mode] [Disabled] Disable the Water Pump control feature. [DC mode] Enable the Water Pump control in DC mode for 3-pin chassis fan. [PWM mode] Enable the Water Pump control in PWM mode for 4-pin chassis fan. The following items appear only when you set the Water Pump Control to [DC mode] or [PWM mode]. PUMP Fan Speed Low Limit [600 RPM] This item allows you to disable or set the water pump warning speed. Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chapter 3 3-28 Chapter 3: BIOS Setup