Home » Asus Manuals » Servers » Asus Z9PH-D16 FDR » Manual Viewer

Asus Z9PH-D16 FDR Z9PH-D16 Series User Manual - Page 111

LSI Software RAID Configuration Utility

Add to My Manuals
Save this manual to your list of manuals

Page 111 highlights

5.2 LSI Software RAID Configuration Utility The LSI MegaRAID software RAID configuration utility allows you to create RAID 0, RAID 1, or RAID 10 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard southbridge chip. To enter the LSI MegaRAID software RAID configuration utility: 1. Turn on the system after installing all the SATA hard disk drives. 2. During POST, the LSI MegaRAID software RAID configuration utility automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press + to enter the utility. LSI MegaRAID Software RAID BIOS Version A.10 09231523R LSI SATA RAID Found at PCI Bus No:00 Dev No:1F Device present at Port 0 ST3160812AS 152114MB Device present at Port 1 ST3160812AS 152114MB Device present at Port 2 ST3160812AS 152114MB Device present at Port 3 ST3160812AS 152114MB Press Ctrl-M or Enter to run LSI Software RAID Setup Utility. • The LSI MegaRAID software RAID configuration utility automatically configures to RAID 1 when the SATA to RAID Mode is enabled. • The RAID setup screens shown in this section are for reference only and may not exactly match the items on your screen due to the controller version difference. • When you create RAID sets with the LSI MegaRAID software RAID configuration utility, the boot priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot from the connected SATA ODD. 3. The utility main window appears. Use the arrow keys to select an option from the Management Menu and then press . Refer to the Management Menu descriptions on the next page. At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Management Menu Configure Initialize Objects Rebuild Check Consistency Configure VD(s) Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option ASUS Z9PH-D16 Series 5-5

Section	Page
Z9PH-D16 Series specifications summary	12
Chapter 1: Product introduction	13
1.1 Welcome!	15
1.2 Package contents	15
1.3 Serial number label	16
1.4 Special features	16
1.4.1 Product highlights	16
1.4.2 Innovative ASUS features	18
Chapter 2: Hardware information	19
2.1 Before you proceed	21
2.2 Motherboard overview	22
2.2.1 Placement direction	22
2.2.2 Screw holes	22
2.2.3 Motherboard layout	23
2.2.3 Motherboard layout	24
2.2.4 Layout contents	25
2.3 Central Processing Unit (CPU)	27
2.3.1 Installing the CPU	27
2.3.2 Installing the CPU heatsink	32
2.4 System memory	33
2.4.1 Overview	33
2.4.2 Memory Configurations	34
2.5 Expansion slots	36
2.5.1 Installing an expansion card	36
2.5.2 Configuring an expansion card	36
2.5.3 Interrupt assignments	37
2.5.4 PCI Express x16 slot (x16 link)	37
2.5.5 Installing ASMB6 management board	38
2.6 Jumpers	39
2.7 Connectors	42
2.7.1 Rear panel connectors	42
2.7.2 Internal connectors	44
2.8 Internal LEDs	52
Chapter 3: Powering up	55
3.1 Starting up for the first time	57
3.2 Powering off the computer	58
3.2.1 Using the OS shut down function	58
3.2.2 Using the dual function power switch	58
Chapter 4: BIOS setup	59
4.1 Managing and updating your BIOS	61
4.1.1 ASUS CrashFree BIOS 3 utility	61
4.1.2 ASUS EZ Flash 2 Utility	62
4.1.3 BUPDATER utility	63
4.2 BIOS setup program	65
4.2.1 BIOS menu screen	66
4.2.2 Menu bar	66
4.2.3 Menu items	67
4.2.4 Submenu items	67
4.2.5 Navigation keys	67
4.2.6 General help	67
4.2.7 Configuration fields	67
4.2.8 Pop-up window	67
4.2.9 Scroll bar	67
4.3 Main menu	68
4.3.1 System Date [Day xx/xx/xxxx]	68
4.3.2 System Time [xx:xx:xx]	68
4.4 Advanced menu	69
4.4.1 CPU Configuration	69
4.4.2 CPU Power Management Configuration	71
4.4.3 Chipset Configuration	73
4.4.4 PCH SATA Configuration	78
4.4.5 PCH SCU Configuration	80
4.4.6 PCI Subsystem Settings	80
4.4.7 Intel TXT(LT-SX) Configuration	83
4.4.8 USB Configuration	84
4.4.9 Trusted Computing	85
4.4.10 ACPI Settings	86
4.4.11 WHEA Configuration	87
4.4.12 APM setting	87
4.4.13 Onboard LAN Configuration	88
4.4.14 Serial Port Console Redirection	89
4.4.15 ME Subsystem	92
4.4.16 Legacy Devices Configuration	92
4.4.17 Runtime Error Logging	93
4.5 Server Mgmt menu	94
4.5.1 System Event Log	95
4.5.2 BMC network configuration	96
4.6 Event Logs menu	97
4.6.1 Change Smbios Event Log Settings	97
4.7 Boot menu	99
4.8 Monitor menu	101
4.9 Security menu	102
4.10 Tool menu	103
4.11 Exit menu	104
Chapter 5: RAID configuration	107
5.1 Setting up RAID	109
5.1.1 RAID definitions	109
5.1.2 Installing hard disk drives	110
5.1.3 Setting the RAID item in BIOS	110
5.1.4 RAID configuration utilities	110
5.2 LSI Software RAID Configuration Utility	111
5.2.1 Creating a RAID set	112
5.2.2 Adding or viewing a RAID configuration	118
5.2.3 Initializing the virtual drives	119
5.2.4 Rebuilding failed drives	123
5.2.5 Checking the drives for data consistency	125
5.2.6 Deleting a RAID configuration	128
5.2.7 Selecting the boot drive from a RAID set	129
5.2.8 Enabling WriteCache	130
5.3 Intel® Rapid Storage Technology enterprise SCU/SATA Option ROM Utility	131
5.3.1 Creating a RAID set	133
5.3.2 Creating a Recovery set	134
5.3.3 Deleting a RAID set	136
5.3.4 Resetting disks to Non-RAID	137
5.3.5 Exiting the Intel® Rapid Storage Technology utility	138
5.3.6 Rebuilding the RAID	138
5.3.7 Setting the Boot array in the BIOS Setup Utility	140
5.4 Intel® Rapid Storage Technology enterprise Utility (Windows)	141
5.4.1 Creating a RAID set	142
5.4.2 Change Volume Type	144
5.4.3 Delete volume	145
5.4.4 Preferences	146
Chapter 6: Driver installation	147
6.1 RAID driver installation	149
6.1.1 Creating a RAID driver disk	149
6.1.2 Installing the RAID controller driver	152
6.2 Intel® Chipset Device Software installation	162
6.3 Intel@ Network Connections Software installation	164
6.4 VGA driver installation	167
6.5 Intel® C600 Series Chipset SATA RAID Drivers	170
6.6 Intel® Rapid Storage Technology enterprise 3.0 installation	171
6.7 Intel® PRO/1000 Gigabit Adapters Driver installation	174
6.8 Management applications and utilities installation	178
6.8.1 Running the support DVD	178
6.8.2 Drivers menu	178
6.8.3 Utilities menu	179
6.8.4 Make disk menu	179
6.8.5 Contact information	179
6.9 Mellanox ConnectX-3 Infiniband driver installation (Z9PH-D16/QDR and Z9PH-D16/FDR only)	180
6.9.1 Windows operating system	180
6.9.2 Red Hat® Enterprise Linux OS	183
Appendix: Reference information	187
A.1 Z9PH-D16 Series block diagram	189

Match case Limit results 1 per page

ASUS Z9PH-D16 Series

5-5

The utility main window appears. Use the arrow keys to select an option from

the

Management Menu

and then press <Enter>. Refer to the Management

Menu descriptions on the next page.

At the bottom of the screen is the legend box. The keys on the legend box

allow you to navigate through the setup menu options or execute commands.

The keys on the legend box vary according to the menu level.

5.2

LSI Software RAID Conﬁguration Utility

The LSI MegaRAID software RAID conﬁguration utility allows you to create RAID 0,

RAID 1, or RAID 10 set(s) from SATA hard disk drives connected to the SATA

connectors supported by the motherboard southbridge chip.

To enter the LSI MegaRAID software RAID conﬁguration utility:

Turn on the system after installing all the SATA hard disk drives.

During POST, the LSI MegaRAID software RAID conﬁguration utility

automatically detects the installed SATA hard disk drives and displays any

existing RAID set(s). Press <Ctrl> + <M> to enter the utility.

•

The LSI MegaRAID software RAID conﬁguration utility automatically

conﬁgures to RAID 1 when the SATA to RAID Mode is enabled.

•

The RAID setup screens shown in this section are for reference only and

may not exactly match the items on your screen due to the controller

version difference.

•

When you create RAID sets with the LSI MegaRAID software RAID

conﬁguration utility, the boot priority of the SATA optical drive has to be

manually adjusted. Otherwise, the system will not boot from the connected

SATA ODD.

LSI Software RAID Conﬁguration Utility Ver C.05 Sep 17, 2010

BIOS Version

A.10.09231523R

Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option

Management Menu

Conﬁgure

Initialize

Objects

Rebuild

Check Consistency

Conﬁgure VD(s)

LSI MegaRAID Software RAID BIOS Version A.10 09231523R

LSI SATA RAID Found at PCI Bus No:00 Dev No:1F

Device present at Port 0

ST3160812AS

152114MB

Device present at Port 1

ST3160812AS

152114MB

Device present at Port 2

ST3160812AS

152114MB

Device present at Port 3

ST3160812AS

152114MB

Press Ctrl-M or Enter to run LSI Software RAID Setup Utility.

Asus Z9PH-D16 FDR Z9PH-D16 Series User Manual - Page 111

LSI Software RAID Configuration Utility

Page 111 highlights

LSI Software RAID Configuration Utility