Asus Z9PH-D16 FDR Z9PH-D16 Series User Manual - Page 87
WHEA Configuration, 4.4.12 APM setting, WHEA Support [Enabled]
View all Asus Z9PH-D16 FDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4.4.11 WHEA Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced WHEA Support [Enabled] Enable or disable Windows Hardware Error Architecture. WHEA Support [Enabled] Allows you to enable or disable the Windows Hardware Error Architecture support. Configuration options: [Disabled] [Enabled] 4.4.12 APM setting Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Restrore AC Power Loss Power On By PCIE Power On By Ring Power On By RTC [Last State] [Disabled] [Disabled] [Disabled] Specify what state to go to when power is re-applied after a power failure (G3 state). Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCIE [Disabled] [Disabled] Disables the PCIE devices to generate a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Resume On By Ring [Disabled] When set to [Enabled], the system will generate a wake event when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled] Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] When set to [Eanbled], the items RTC Alarm Date (Days) and Hour/Minute/Second will become user-configurable with set values. ASUS Z9PH-D16 Series 4-29