Home » Asus Manuals » Servers » Asus Z9PH-D16 FDR » Manual Viewer

Asus Z9PH-D16 FDR Z9PH-D16 Series User Manual - Page 139

Rebuilding the RAID with a new hard disk, Start > Programs > Intel Rapid

Add to My Manuals
Save this manual to your list of manuals

Page 139 highlights

3. The utility immediately starts rebuilding after the disk is selected. The status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104 Copyright(C) 2003-11 Intel Corporation. All Rights Reserved. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Exit RAID Volumes: ID Name 0 Volume0 [ DISK/VOLUME INFORMATION ] Level RAID1(Mirror) * = Data is Encrypted Strip Size Status Bootable N/A 149.0GB Rebuild Yes Physical Devices: Port Drive Model 1 ST3160812AS 2 ST3160812AS Serial # 9LS0F4HL 3LS0JYL8 Size 149.0GB 149.0GB Type/Status(Vol ID) Member Disk(0) Member Disk(0) Volumes with "Rebuild" status will be rebuilt within the operating system. [↑↓]-Select [ESC]-Exit [ENTER]-Select Menu 4. Exit Intel Rapid Storage Technology and reboot the system. 5. Under Microsoft® Windows OS, select Start > Programs > Intel Rapid Storage > Intel Rapid Storage Console or click the Intel Rapid Storage Technology tray icon to load the Intel Rapid Storage Manager utility. 6. From the View menu, select Advanced Mode to display the details of the Intel Rapid Storage Console. 7. From the Volumes view option, select RAID volume to view the rebuilding status. When finished, the status is changed to "Normal". Rebuilding the RAID with a new hard disk If any of the SATA hard disk drives included in the RAID array failed, the system displays the status of the RAID volume as "Degraded" during POST. You may replace the disk drive and rebuild the RAID array. To rebuild the RAID with a new hard disk: 1. Remove the failed SATA hard disk and install a new SATA hard disk of the same specification into the same SATA Port. Select a destination disk with the same size as the original hard disk. 2. Reboot the system and then follow the steps in section Rebuilding the RAID with other non-RAID disk. ASUS Z9PH-D16 Series 5-33

Section	Page
Z9PH-D16 Series specifications summary	12
Chapter 1: Product introduction	13
1.1 Welcome!	15
1.2 Package contents	15
1.3 Serial number label	16
1.4 Special features	16
1.4.1 Product highlights	16
1.4.2 Innovative ASUS features	18
Chapter 2: Hardware information	19
2.1 Before you proceed	21
2.2 Motherboard overview	22
2.2.1 Placement direction	22
2.2.2 Screw holes	22
2.2.3 Motherboard layout	23
2.2.3 Motherboard layout	24
2.2.4 Layout contents	25
2.3 Central Processing Unit (CPU)	27
2.3.1 Installing the CPU	27
2.3.2 Installing the CPU heatsink	32
2.4 System memory	33
2.4.1 Overview	33
2.4.2 Memory Configurations	34
2.5 Expansion slots	36
2.5.1 Installing an expansion card	36
2.5.2 Configuring an expansion card	36
2.5.3 Interrupt assignments	37
2.5.4 PCI Express x16 slot (x16 link)	37
2.5.5 Installing ASMB6 management board	38
2.6 Jumpers	39
2.7 Connectors	42
2.7.1 Rear panel connectors	42
2.7.2 Internal connectors	44
2.8 Internal LEDs	52
Chapter 3: Powering up	55
3.1 Starting up for the first time	57
3.2 Powering off the computer	58
3.2.1 Using the OS shut down function	58
3.2.2 Using the dual function power switch	58
Chapter 4: BIOS setup	59
4.1 Managing and updating your BIOS	61
4.1.1 ASUS CrashFree BIOS 3 utility	61
4.1.2 ASUS EZ Flash 2 Utility	62
4.1.3 BUPDATER utility	63
4.2 BIOS setup program	65
4.2.1 BIOS menu screen	66
4.2.2 Menu bar	66
4.2.3 Menu items	67
4.2.4 Submenu items	67
4.2.5 Navigation keys	67
4.2.6 General help	67
4.2.7 Configuration fields	67
4.2.8 Pop-up window	67
4.2.9 Scroll bar	67
4.3 Main menu	68
4.3.1 System Date [Day xx/xx/xxxx]	68
4.3.2 System Time [xx:xx:xx]	68
4.4 Advanced menu	69
4.4.1 CPU Configuration	69
4.4.2 CPU Power Management Configuration	71
4.4.3 Chipset Configuration	73
4.4.4 PCH SATA Configuration	78
4.4.5 PCH SCU Configuration	80
4.4.6 PCI Subsystem Settings	80
4.4.7 Intel TXT(LT-SX) Configuration	83
4.4.8 USB Configuration	84
4.4.9 Trusted Computing	85
4.4.10 ACPI Settings	86
4.4.11 WHEA Configuration	87
4.4.12 APM setting	87
4.4.13 Onboard LAN Configuration	88
4.4.14 Serial Port Console Redirection	89
4.4.15 ME Subsystem	92
4.4.16 Legacy Devices Configuration	92
4.4.17 Runtime Error Logging	93
4.5 Server Mgmt menu	94
4.5.1 System Event Log	95
4.5.2 BMC network configuration	96
4.6 Event Logs menu	97
4.6.1 Change Smbios Event Log Settings	97
4.7 Boot menu	99
4.8 Monitor menu	101
4.9 Security menu	102
4.10 Tool menu	103
4.11 Exit menu	104
Chapter 5: RAID configuration	107
5.1 Setting up RAID	109
5.1.1 RAID definitions	109
5.1.2 Installing hard disk drives	110
5.1.3 Setting the RAID item in BIOS	110
5.1.4 RAID configuration utilities	110
5.2 LSI Software RAID Configuration Utility	111
5.2.1 Creating a RAID set	112
5.2.2 Adding or viewing a RAID configuration	118
5.2.3 Initializing the virtual drives	119
5.2.4 Rebuilding failed drives	123
5.2.5 Checking the drives for data consistency	125
5.2.6 Deleting a RAID configuration	128
5.2.7 Selecting the boot drive from a RAID set	129
5.2.8 Enabling WriteCache	130
5.3 Intel® Rapid Storage Technology enterprise SCU/SATA Option ROM Utility	131
5.3.1 Creating a RAID set	133
5.3.2 Creating a Recovery set	134
5.3.3 Deleting a RAID set	136
5.3.4 Resetting disks to Non-RAID	137
5.3.5 Exiting the Intel® Rapid Storage Technology utility	138
5.3.6 Rebuilding the RAID	138
5.3.7 Setting the Boot array in the BIOS Setup Utility	140
5.4 Intel® Rapid Storage Technology enterprise Utility (Windows)	141
5.4.1 Creating a RAID set	142
5.4.2 Change Volume Type	144
5.4.3 Delete volume	145
5.4.4 Preferences	146
Chapter 6: Driver installation	147
6.1 RAID driver installation	149
6.1.1 Creating a RAID driver disk	149
6.1.2 Installing the RAID controller driver	152
6.2 Intel® Chipset Device Software installation	162
6.3 Intel@ Network Connections Software installation	164
6.4 VGA driver installation	167
6.5 Intel® C600 Series Chipset SATA RAID Drivers	170
6.6 Intel® Rapid Storage Technology enterprise 3.0 installation	171
6.7 Intel® PRO/1000 Gigabit Adapters Driver installation	174
6.8 Management applications and utilities installation	178
6.8.1 Running the support DVD	178
6.8.2 Drivers menu	178
6.8.3 Utilities menu	179
6.8.4 Make disk menu	179
6.8.5 Contact information	179
6.9 Mellanox ConnectX-3 Infiniband driver installation (Z9PH-D16/QDR and Z9PH-D16/FDR only)	180
6.9.1 Windows operating system	180
6.9.2 Red Hat® Enterprise Linux OS	183
Appendix: Reference information	187
A.1 Z9PH-D16 Series block diagram	189

Match case Limit results 1 per page

ASUS Z9PH-D16 Series

5-33

The utility immediately starts rebuilding after the disk is selected. The status

of the degraded RAID volume is changed to

“Rebuild”

[

MAIN MENU

]

[

DISK/VOLUME INFORMATION

]

RAID Volumes:

= Data is Encrypted

Name

Level

Strip

Size

Status

Bootable

Volume0

RAID1(Mirror)

N/A

149.0GB

Rebuild

Yes

Physical Devices:

Port Drive Model

Serial #

Size

Type/Status(Vol ID)

ST3160812AS

9LS0F4HL

149.0GB

Member Disk(0)

ST3160812AS

3LS0JYL8

149.0GB

Member Disk(0)

Volumes with “Rebuild” status will be rebuilt within the operating system.

[

↑↓

]-Select

[ESC]-Exit

[ENTER]-Select Menu

Exit Intel Rapid Storage Technology and reboot the system.

Under Microsoft

Windows OS, select

Start > Programs > Intel Rapid

Storage > Intel Rapid Storage Console

or click the

Intel Rapid Storage

Technology

tray icon to load the Intel Rapid Storage Manager utility.

From the

View

menu, select

Advanced Mode

to display the details of the

Intel Rapid Storage Console.

From the

Volumes view

option, select

RAID volume

to view the rebuilding

status. When ﬁnished, the status is changed to “

Normal

”.

Rebuilding the RAID with a new hard disk

If any of the SATA hard disk drives included in the RAID array failed, the system

displays the status of the RAID volume as “

Degraded

” during POST. You may

replace the disk drive and rebuild the RAID array.

To rebuild the RAID with a new hard disk:

Remove the failed SATA hard disk and install a new SATA hard disk of the

same speciﬁcation into the same SATA Port.

Select a destination disk with the same size as the original hard disk.

Reboot the system and then follow the steps in section

Rebuilding the RAID

with other non-RAID disk

Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104

1. Create RAID Volume

3. Reset Disks to Non-RAID

2. Delete RAID Volume

4. Exit