Autodesk CIVIL3D Tutorial - Page 272
Save the design criteria file, In the Enter A File Name To Save dialog box, navigate to
UPC - 606121716273
View all Autodesk CIVIL3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
2 In the drawing, select the alignment. 3 Click Alignment tab ➤ Modify panel ➤ Design Criteria Editor . When the Design Criteria Editor dialog box opens, it displays the design criteria for the default design criteria file. The folders on the left side of the dialog box contain tables that specify the units of measure used in the design criteria file, and design criteria tables for alignments and profiles. You can use this dialog box to modify the criteria in the current file, open another file, or create a new file. In the following steps, you will add a criteria table to an existing file, and then save the changes as a new file. 4 On the left side of the dialog box, expand the Alignments ➤ Minimum Radius Tables collection. The collection contains several minimum radius tables. 5 Right-click Minimum Radius Tables. Click New Minimum Radius Table. An empty table appears at the end of the Minimum Radius Tables collection. 6 Replace the New Minimum Radius Table text with Local Standards eMax 7%. Press Enter. Save the design criteria file 1 Click Save As. 2 In the Enter A File Name To Save dialog box, navigate to the My Civil Tutorial Data folder (page 819). In the File Name field, enter Sample_Local_Criteria.xml. Click Save. If a design criteria file must be shared by multiple users, it must be saved in a location to which all applicable users have access. If you send a drawing that uses a custom design criteria file to a user that does not have access to the shared location, then you also must send the design criteria file. TIP When the Use Design Criteria File option is selected during alignment creation, the first design criteria found in the Data\Corridor Design Standards\[units] folder (page 819) is applied to an alignment by default. To ensure that a custom design criteria file is selected by default, make sure that its name places it first in the directory. 260 | Chapter 8 Alignments Tutorials