Autodesk CIVIL3D Tutorial - Page 760

9 In the Alignment Label Set dialog box, in the Geometry Points row, in the Geometry Points To Label column, click . 10 In the Geometry Points dialog box, click to clear all check boxes. Select the Alignment Beginning check box. Click OK. You can use geometry point label types to label a selection of geometry points using a combination of styles that you specify. In steps 8 and 9, you applied a geometry point label style to the alignment starting station. In the following steps, you will create another instance of the Geometry Points label type that applies a different style to the alignment ending station. TIP To remove a label type from the label set, select the type and click . 11 In the Alignment Label Set dialog box, on the Labels tab, specify the following parameters: ■ Type: Geometry Points ■ Geometry Point Label Style: Alignment End 12 Click Add. 13 In the Geometry Points dialog box, click to clear all check boxes. Select the Alignment End check box. Click OK. 14 In the Alignment Label Set dialog box, click OK. 15 In the Create Alignment - From Polyline dialog box, under Conversion Options, clear the Add Curves Between Tangents check box. Click OK. 16 Zoom in to the area surrounding the new alignment and examine the labels that were automatically placed along the alignment. NOTE If the EP: 0+243.63 label is adjacent to the intersecting alignment, click Alignment tab ➤ Modify panel Reverse Direction . Click the alignment. Click OK to acknowledge the warning about alignment properties that are affected by the command. When the alignment is created, it is green. The green color is controlled by the alignment style that you specified in step 3. Notice that the new 748 | Chapter 19 Labels and Tables Tutorials