Autodesk CIVIL3D Tutorial - Page 406

4 In the Apply Feature Line Names dialog box, place the cursor at the beginning of the Name field. Enter ABC. The Name field should contain ABC . Click OK. 5 In Toolspace, on the Prospector tab, expand Sites ➤ Site 1. Select the Feature Lines collection. Notice that the two feature lines and their names are displayed in the Prospector list view. Next, you will draw a feature line and specify elevations along the line. Draw a feature line 1 Click Home tab ➤ Create Design panel ➤ Feature Line drop-down ➤ Create Feature Line . 2 In the Create Feature Lines dialog box, specify the following parameters: ■ Name Check Box: Selected ■ Name: CDEF ■ Style Check Box: Selected ■ Style: Ditch 3 In the Create Feature Lines dialog box, click OK. 4 In the drawing window, snap to the end of the feature line inside circle C. When prompted, enter 688.00 as the elevation. You have entered a known value for the starting elevation. In the following steps, you will use the transition command to defer entering elevation values at intermediate points along the feature line. 5 Stretch the feature line and click inside circle D. When prompted for an elevation, enter T. 6 Stretch the feature line and click inside circle E. When prompted for an elevation, press Enter to accept Transition. 7 Stretch the feature line and click inside circle F. When prompted for a transition, enter SU to use the elevation of the surface at that point. 8 Note the surface elevation shown at the command line. Press Enter twice to accept the elevation and end the command. 394 | Chapter 11 Grading Tutorials