Axis Communications P1224-E P1214-E Network Camera - User Manual - Page 31

AXIS P1214-E Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must authenticate themselves. The authentication is performed by a third-party entity called an authentication server, typically a RADIUS server, examples of which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' implementation, the network device and the authentication server authenticate themselves with the help of digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security). The certificates are provided by an Certification Authority (CA). You need: • a CA certificate to validate the identity of the authentication server • a CA-signed client certificate and a private key to authenticate the network device. To allow the network device to access a network protected by IEEE 802.1X: 1. Obtain a CA certificate, a client certificate and a client private key (contact your network administrator). 2. Go to Setup > System Options > Security > IEEE 802.1X and upload the CA certificate, the client certificate and the client private key. 3. Under Settings, select the EAPOL version, provide your EAP identity and private key password. 4. Check the box to enable IEEE 802.1X and click Save. Certificates CA Certificate Client certificate Client private key The CA certificate is used to validate the identity of the authentication server. Enter the path to the certificate directly, or locate the file using the Browse button. Then click Upload. To remove a certificate, click Remove. The client certificate and private key are used to authenticate the network device. They can be uploaded as separate files or in one combined file (e.g. a PFX file or a PEM file). Use the Client private key field if uploading one combined file. For each file, enter the path to the file, or locate the file using the Browse button. Then click Upload. To remove a file, click Remove. Settings EAPOL version EAP identity Private key password Enable IEEE 802.1X Select the EAPOL version (1 or 2) as used in your network switch. Enter the user identity (maximum 16 characters) associated with your certificate. Enter the password (maximum 16 characters) for the private key. Check the box to enable the IEEE 802.1X protocol. Date & Time The Axis product's date and time settings are configured under System Options > Date & Time. Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below). To change the date and time settings, select the preferred Time mode under New Server Time: • Synchronize with computer time - Sets date and time according to the computer's clock. With this option, date and time are set once and will not be updated automatically. • Synchronize with NTP Server - Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 34. 31