Beko WDIK752451 Owners Manual - Page 31

• Anti-Crease+ If you press and hold the spin selection button for 3 seconds, this function will be selected and the programme follow-up light of the relevant programme will turn on. When this function is selected, it aerates the laundry for up to 8 hours at the end of the programme to prevent creasing. You can cancel the programme and take your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off key to cancel the function. The programme follow-up light will remain on until the function is cancelled or the step is complete. If the function cannot be cancelled, it will be active in the subsequent washing cycles as well. • Steam You can press and hold the auxiliary function key 2 for 3 seconds to select this function. Use this programme to reduce the wrinkles and shorten the ironing times for a small amount of cotton, synthetic or mixed clothes that are not stained. • Child lock You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme. C INFORMATION • When the Child Lock is enabled, you can press the On/Off key to switch the machine on or off. Programme resumes when you start the machine again. • You will hear a warning if the buttons are pressed while Child Lock is enabled. This audible warning will be cancelled if the buttons are pressed five times consecutively. To enable Child Lock: Press and hold the Drying Level Adjustment button for 3 seconds. When the countdown "3-2-1" on the display ends, child lock icon will be displayed. Once you see this warning, you can release the Drying Level Adjustment button. To disable Child Lock: Press and hold the Drying Level Adjustment button for 3 seconds. When the countdown "3-2-1" on the display ends, child lock icon will disappear. • Bluetooth You can use the Bluetooth connection function to pair your machine with your smart device. This way, you can use your smart device to get information about your machine and control it. To enable Bluetooth: Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1", and bluetooth symbol will be displayed. Release the Remote Control function button. The Bluetooth icon will flash while the product is being paired with the smart device. If the connection is successful, the light of the icon will remain on. To disable Bluetooth: Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1", and bluetooth symbol will be disappear. C INFORMATION • You must complete the first setup of the HomeWhiz app for Bluetooth to be enabled. After the setup, if you press the Remote Control function button while the button is in the Programme Download/Remote Control position, the Bluetooth connection will be enabled automatically. 5.12 Drying steps - 5.12.1 Iron Dry Drying continues until the drying level reaches the Iron Dry step. 5.12.2 Cupboard Dry Drying continues until the drying level reaches the Cupboard Dry step. 31 / EN Washer-Dryer / User Manual