Beko WDIK752451 Owners Manual - Page 32
Extra Dry, 12.4 Time based, drying - minutes, 13 Time display, 14 End Time
View all Beko WDIK752451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5.12.3 Extra Dry Drying continues until the drying level reaches the Cupboard Extra Dry step. C INFORMATION • The dryness level might change depending on the mix of laundry, type of material, amount and wetness level of the laundry. • Do not use the machine to dry laundry that contains lace, tulle, bling, beads, paillette, wire etc. or laundry with high silk content. 5.12.4 Time based drying - minutes You can select 30, 90 or 150 minutes drying to reach the desired dryness level at a low temperature. C INFORMATION • When drying small amount of laundry (2 pieces maximum), select the timed drying steps in the Cottons or Synthetics drying programmes. • If the laundry has not reached the desired dryness level at the end of the drying programme, you can select timed drying to end the process. • When this function is selected, the machine performs drying for the adjusted time irrespective of the drying level. 5.13 Time display While the programme is running, the time remaining to the end of the programme will be displayed in hours and minutes, e.g. "01:30". C INFORMATION • Programme time may differ from the values in section "Programme and consumption table" depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes in the mains voltage. 5.14 End Time - With the End Time function, start of the programme can be delayed up to 24 hours. After pressing the End Time button, the programme's estimated end time will be displayed. If an End Time is set, the End Time light will turn on. To ensure that the End Time function is enabled and the programme ends at the end of the defined duration, you should press Start / Pause after setting the duration. The Start/ Pause button will stop flashing and remain on. If you want to cancel End Time function, press the End Time button until the End Time light turns off or press the On/Off button to turn off and on the machine. 1. Open the loading door, place the laundry and add detergent, etc. 2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3. Press the End Time button to set the desired end time. The End Time light will turn on. 4. Press the Start / Pause button. Countdown will start. ":" sign in the middle of the end time on the display will start flashing. C INFORMATION • Do not use liquid detergents when you enable the End Time function! Stains might remain on the clothes. • The door will remain locked during the End Time countdown. If you want to unlock the door, press the programme start/ pause button to switch the machine to pause mode. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display. • When End Time is selected, the time displayed on the screen consists of the end time plus the duration of the selected programme. 32 / EN Washer-Dryer / User Manual