Beko WMC126 User Manual - Page 10
Connecting to the drain, Adjusting the feet, Electrical connection
View all Beko WMC126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting to the drain t 5IFFOEPGUIFESBJOIPTFNVTUCF directly connected to the wastewater drain or to the washbasin. A:PVSIPVTFXJMMCFGMPPEFEJGUIF hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out. t 5IFIPTFTIPVMECFBUUBDIFEUPB IFJHIUPGBUMFBTUDN BOEDN at most. t *ODBTFUIFIPTFJTFMFWBUFEBGUFS laying it on the floor level or close UPUIFHSPVOE MFTTUIBODN above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. an appropriate clamp as not to come off and leak. Adjusting the feet A In order to ensure that the product operates more silent and vibrationfree, it must stand level and balanced on its feet. Balance the machine by BEKVTUJOHUIFGFFU0UIFSXJTF UIF product may move from its place and cause crushing and vibration problems. t 5PQSFWFOUGMPXJOHPGEJSUZXBUFSCBDL into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in UIFESBJONPSFUIBODN*GJUJTUPP long, cut it short. t 5IFFOEPGUIFIPTFTIPVMEOPUCF bent, it should not be stepped on and the hose must not be pinched between the drain and the machine. t *GUIFMFOHUIPGUIFIPTFJTUPPTIPSU use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with -PPTFOUIFMPDLOVUTPOUIFGFFUCZ hand. "EKVTUUIFGFFUVOUJMUIFQSPEVDU stands level and balanced. 3. Tighten all lock nuts again by hand. A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged. Electrical connection Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable EN