Beko WMC126 User Manual - Page 9

the User Manual bag into the holes on the rear panel. (P) 2. Tighten all hose nuts by hand. Never use a wrench when tightening the nuts. in a safe place to reuse when the washing machine needs to be moved again in the future. Never move the product without the transportation safety bolts properly fixed in place! Connecting water supply The water supply pressure required from the fully open tap in one minute to have your machine run smoothly. water pressure is higher. Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry. Connect the special hose supplied with the product to the water inlets on the product. 3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use. EN