Beko WMC126 User Manual - Page 26

Progress of programme Progress of a running programme can be followed from the Programme of every programme step, the relevant indicator light will turn on and light of the completed step will turn off. speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be in a step after the running programme step. If the change is not compatible, relevant lights will flash for 3 times. If the machine does not pass to the might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine. Loading door lock There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable. Loading door light will start flashing when the machine is switched to Pause mode. Machine checks the level of the water inside. If the level is suitable, Loading minutes and the loading door can be opened. If the level is unsuitable, Loading Door light turns off and the loading door cannot be opened. If you are obliged to open the Loading Door while the Loading Door light is off, you have to cancel the current programme; see "Cancelling the programme". Changing the selections after programme has started Switching the machine to pause mode the machine to pause mode while a programme is running. The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to show that the machine has been switched to the pause mode. be opened, Loading Door light will also illuminate continuously in addition to the programme step light. Changing the speed and temperature settings for auxiliary functions Depending on the step the programme has reached, you may cancel or activate function selection". temperature settings; see, "Spin speed selection" and "Temperature selection". If no change is allowed, the relevant light will flash for 3 times. Adding or taking out laundry the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. Wait until the Loading Door can be opened. Open the Loading Door and add or take out the laundry. Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if start the machine. Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been cancelled. when you turn the Programme Selection knob; however, it does not drain the water inside. When you select and start a new programme, the newly selected EN