Beko WMC126 User Manual - Page 30
When the water inside the machine is
View all Beko WMC126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
a. Pull the emergency draining hose out from its seat b. Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of UIFIPTFCZSFQMBDJOHUIFQMVH"GUFS the container is emptied, repeat the above procedure to drain the water in the machine completely. c. When draining of water is finished, close the end by the plug again and fix the hose in its place. d. Turn the pump filter to take it out. Discharging the water when the product does not have an emergency draining hose: while installing it into its housing. Seat the filter into its place completely. Otherwise, water may leak from the filter cap. *GUIFGJMUFSDBQJTDPNQPTFEPGUXP pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close. a. Place a large container in front of the filter to catch water from the filter. b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. "MXBZTLFFQBQJFDFPGDMPUIIBOEZUP absorb any spilled water. c. When the water inside the machine is finished, take out the filter completely by turning it. $MFBOBOZSFTJEVFTJOTJEFUIFGJMUFSBT well as fibers, if any, around the pump impeller region. *OTUBMMUIFGJMUFS A*GZPVSQSPEVDUIBTBXBUFSKFUGFBUVSF be sure to fit the filter into its housing in the pump. Never force the filter EN