Beko WMC126 User Manual - Page 25
Starting the programme, Child Lock, To activate the Child Lock
View all Beko WMC126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Changing the Delayed Start period Press Delayed Start button. Every time the button is pressed, the period will change in 3-hour increments and the light of the selected delayed start time will turn on. Cancelling the Delayed Start function If you want to cancel the delayed start countdown and start the programme immediately: Set the Delayed Start period to zero (all delayed start period lights will turn off) or turn the Programme Selection knob to any programme. Thus, Delayed Start function will be cancelled. The End/Cancel light flashes continuously. Then, select the programme you want to run again. programme. Starting the programme programme. Programme follow-up light showing the startup of the programme will turn on. Child Lock Use child lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme. If the Programme Selection knob is rotated when the child lock is active, st and 2nd auxiliary function buttons will blink 3 times. The child lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions. Even if another programme is selected with the Programme Selection knob while the Child Lock is active, previously selected programme will continue running. When the Child Lock is active and the machine is running, you can switch the machine to Pause mode without deactivating the Child Lock by turning the Programme Selection To activate the Child Lock: st and 2nd Function buttons for 3 seconds. The st and 2nd buttons will flash while you keep the buttons pressed for 3 seconds. To deactivate the Child Lock: st and 2nd auxiliary function buttons for 3 seconds while any programme is running. The lights on the st and 2nd flash while you keep the buttons pressed for 3 seconds. In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On is running, and select another programme. When the power is restored after a power failure or after your machine is unplugged and plugged in again, the Child Lock will not be deactivated when the machine resumes operating. you turn the Programme Selection knob afterwards, the programme will resume. EN