Beko WMC126 User Manual - Page 11
plug must not be used until a replacement
View all Beko WMC126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
for any damages that will arise when the product is used without grounding in accordance with the local regulations. regulations. reach after installation. breaker protection are specified in the "Technical specifications" section. If the current value of the fuse or to your mains voltage. extension cables or multi-plugs. Damaged power cables must be replaced by the Authorised Service Agents. Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store. Important Fitting a different plug lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: (earth) wire to the terminal in the plug marked 'E' or with the symbol f or coloured green and yellow or green. 2 Connect the blue (neutral) wire to the terminal in the plug marked 'N' or coloured black. 3 Connect the brown (live) wire to the terminal in the plug marked 'L' or coloured red. be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. This appliance must be earthed If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement EN