Belkin F1DA104Q User Manual - Page 20
BANK-DIP-Switch Configuration Chart
UPC - 722868650004
View all Belkin F1DA104Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation How to Assign a BANK Address All PRO3 KVM Switches feature a "BANK DIP" switch. The "BANK DIP" switch is used to assign the proper BANK address to each PRO3 KVM Switch. • For a single-unit configuration, set the "BANK DIP" switch on the PRO3 KVM Switch to the "primary" (BANK address 00) setting. This is the factory default setting. • For a multi-unit configuration, the "BANK DIP" switch on the primary KVM switch must be set to "BANK address 00". Each secondary unit must be set to a unique BANK address (from 01 through 15). Refer to the chart below for "BANK DIP" switch settings. BANK-DIP-Switch Configuration Chart DIP SWITCH# 1 2 3 4 5 6 ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON OFF ON ON ON ON OFF OFF ON ON ON ON ON ON OFF ON ON ON OFF ON OFF ON ON ON ON OFF OFF ON ON ON OFF OFF OFF ON ON ON ON ON ON OFF ON ON OFF ON ON OFF ON ON ON OFF ON OFF ON ON OFF OFF ON OFF ON ON ON ON OFF OFF ON ON OFF ON OFF OFF ON ON ON OFF OFF OFF ON ON OFF OFF OFF OFF ON = Up Position, OFF = Down Position BANK ADDRESS BANK 0 BANK 1 BANK 2 BANK 3 BANK 4 BANK 5 BANK 6 BANK 7 BANK 8 BANK 9 BANK 10 BANK 11 BANK 12 BANK 13 BANK 14 BANK 15 PRIMARY (default) SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY Example: Four 8-Port PRO3 KVM Switches (F1DA108Zea) are daisy-chained together to manage up to 32 servers. The DIP switch on the primary KVM switch is set to "BANK 00" (factory default) and the secondary units are each set to a unique BANK (between 01 and 03). 18