BenQ PL460 Color Management Manual - Page 12

12 Using the Color Management 3. You will be requested to put the color meter in the center of the display's screen. A center pattern is displayed on the screen for alignment at the same time. Click Yes. 4. The calibration starts, and the status will be indicated in the Calibration Status area. - Initial: The computer is validating connection to the display and color meter. - Measure: The color meter is measuring the display's color profile. - Produce: The Color Management is calculating for optimal values. - Write: The Color Management is transmitting the updated Look Up Table (LUT) to the display. - Fine-tune: The Color Management is fine-tuning the backlight. During calibration, do not change the position of the color meter, move the display to another location or change display settings. Otherwise the precision of calibration will be affected. 5. When calibration is completed, the status bar of the display box changes from "Not Calibrated" to "Calibrated", and its color becomes green. The x and y values of the W/R/G/B colors will also appear in the box. Now you have successfully calibrated the display. You can fine-tune the calibration result manually using the Manual Adjust tool. Refer to "Manual Adjust tool" on page 21 for more information.