Beretta Stampede Old West Beretta Stampede User Manual - Page 25

AMMUNITION AMMUNITION (CARTRIDGE) NOTICE: Beretta specifically disclaim responsibility for any damage or injury whatsoever occurring in connection with, or as the result of, the use in Beretta Stampede revolvers of faulty, or non-standard, or "remanufactured," or hand-loaded (reloaded) ammunition, or cartridges other than those for which the firearm was originally chambered. Use only high-quality, commercially-manufactured ammunition that is manufactured in accordance with CIP (Europe and elsewhere) or SAAMI (USA) standards. Be certain that the ammunition is the appropriate caliber and loading for the firearm and is clean, dry, and in good condition. The cartridge designation for your revolver is marked on the side of the barrel. ! WARNING: Ammunition that is too small can drop through the chamber into the barrel and cause a barrel obstruction. If additional ammunition is loaded in the chamber and fired, a catastrophic failure will occur. Carefully inspect each cartridge before it is loaded in the chamber. Be certain the cartridge cases are not split, deformed, or the cartridges do not possess any other dents or defects (this applies even to factory ammunition). Do not fire old ammunition in this firearm. Primers, powder, cartridge cases, and bullets can deteriorate with time and cause damage to the firearm, or injury to the shooter or others. ! WARNING: Do not use reloaded or handloaded ammunition. Beretta assumes no liability for incidents occurring through the use of reloaded ammunition. Use of reloaded ammunition will void the manufacturer's warranty. 25