Beretta Stampede Old West Beretta Stampede User Manual - Page 33
Cease Firing Immediately
View all Beretta Stampede Old West manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. With the gun pointed in a SAFE direction, wait one (1) full minute. 4. After one (1) full minute has elapsed, completely unload the firearm by following the unloading instructions in this manual. 5. Carefully inspect your ammunition. 6. Immediately refer to a qualified gunsmith if the firing pin indent on a fired cartridge's primer is light, off-center or does not exist. 7. Using the disassembly instructions in the beginning of this manual under Obstruction Check, remove the cylinder and visually and manually check to be sure there are no obstructions in the chambers and bore. If a chamber or bore obstruction is detected, a qualified gunsmith must remove the obstruction and inspect the revolver before it can be fired. ! WARNING: If another cartridge is fired into an obstructed chamber or bore, a catastrophic failure can result. ! WARNING: Never attempt to fire ammunition that did not fire the first time. If, while firing, you hear a change in the sound a fired cartridge makes, or feel a change in the amount of recoil of a fired cartridge, or detect any other irregularity: 1. CEASE FIRING IMMEDIATELY! 2. Keep the firearm pointed in a SAFE direction. A "squib load" may have occurred. A "squib" occurs when a cartridge fires, but with insufficient force to drive the bullet out of the chamber or bore. This can result in a dangerous bore obstruction. ! WARNING: If another cartridge is fired into an obstructed chamber or bore, a catastrophic failure can result. 33