Bernina 530 Manual - Page 28
Buttonhole, Sewing
View all Bernina 530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
THREAD CUTTER 1t of Cx 50 The presser foot clamping lever on the BERNINA sewing machine at a convenient spot is provided with a sharp edge to be used as thread cutter. (See illustration.) This device helps save time especially when scissorsarenot in reach of hands. Fig. 27 Fig. 26 c Buttonhole Sewing automatic There are three kinds of buttonholes: A) the ordinary buttonhole B) the buttonhole with cord inlay C) the raised buttonhole A. The ordinary buttonhole This is sewn with normal lower thread tension, but with special threading of the bobbin case (see Fig. 27). The sewing of the buttonhole with the new buttonhole device is effected without turning the cloth round. The buttonhole can be sewn either step by step, the machine being stopped after each operation, or in one working operation, i. e. without interrupting the various working stages. It will be well to learn sewing buttonholes step by step. After a little time you will naturally sew the whole buttonhole in one working operation. 51