Bernina Activa 210 User Guide - Page 14
Threading the upper thread
View all Bernina Activa 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 Setting up the sewing computer Threading the upper thread A Attaching the thread spool • raise the needle and the presser foot • switch the power off • attach the foam pad • place spool on pin (thread unwinds clockwise) • attach the appropriate spool disc - diameter of spool disc is disc size. There must be no clearance between the disc and the spool • take thread through rear guide A • then into slit of upper thread tension • pull thread down to the right of the take-up cover to B • take thread up to the left of the cover to C in the direction of the arrow, placing it in the take-up level • take thread down and through guides D and E 032622.50.04_0701_a210_EN C D B E Please refer to the safety instruction!
Setting up the sewing computer
14
Threading the upper thread
Attaching the thread spool
•
raise the needle and the presser foot
•
switch the power off
•
attach the foam pad
•
place spool on pin (thread unwinds clockwise)
•
attach the appropriate spool disc - diameter of spool disc is disc
size. There must be no clearance between the disc and the spool
•
take thread through rear guide
A
•
then into slit of upper thread tension
•
pull thread down to the right of the take-up cover to
B
•
take thread up to the left of the cover to
C
in the direction of
the arrow, placing it in the take-up level
•
take thread down and through guides
D
and
E
Please refer to the
safety instruction!
C
D
E
B
A
032622.50.04_0701_a210_EN