Bernina Activa 210 User Guide - Page 6

6 Standard Accessories Accessories* Foot control *may vary from country to country Power cable D C A B • Accessory bag • 2 bobbins (+ 1 in bobbin case) • Presser feet shaft with 4 soles • Selection of 130/705H needles • Seam ripper • Lint brush • 3 spool discs • Foam pad • Oiler • Instruction manual • Foot control • Power cable • Warranty card The foot control regulates the sewing speed Sewing speed is adjusted by applying more or less pressure to the foot control. Important! (USA/Canada only) Use only foot controller type SR-1 with sewing computer activa 210. Self storing cord • wind the cord on the reel • insert the plug into the groove provided The power cable • plug A into sewing computer • plug B into wall socket Foot control cable • plug C into sewing computer Power switch (D) 1 the computer is switched on 0 the computer is switched off The sewing light is switched on and off with the power switch. Important! (USA/Canada only) This sewing computer has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug When sewing • unwind the cable Refer to the safety instruction! does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrican to install the proper outlet. Do not modify the plug in any way. 032622.50.04_0701_a210_EN