Bernina Activa 210 User Guide - Page 31

Cleaning Maintenance 31 If the sewing computer is stored in a cold room, it should be brought to a warm room about one hour before use. Clean the sewing computer after every use • turn power switch to «0» (off) and pull out plug from electric outlet • remove presser foot and needle • open the free-arm cover • press the stitch plate down at the back right corner, lift and remove • clean the area with the lint brush • replace the stitch plate CAUTION Disconnect plug from the socket before cleaning and servicing Cleaning the hook • turn power switch to «0» (off) and pull out plug from electric outlet • remove the bobbin case • push the release lever to the left • push the locking lever to the left and fold down the hook race cover • remove the hook • clean the hook race with a cloth or brush, never use a sharp instrument • replace the hook, turning the handwheel if necessary so that the hook driver is on the left • close the hook race cover and secure with the locking lever, the locking pin must engage • check by turning the handwheel • insert the bobbin case Lubricating • squeeze 2-3 drops of oil into the hook race • run the machine for a short time without thread to prevent oil soiling your work Cleaning the LCD display and the sewing computer • wipe with a damp cloth Important! Never use alcohol, petrol, white spirit or any type of solvent to clean the sewing computer! Please refer to the safety instruction! 032622.50.04_0701_a210_EN