Bernina Bernette 20 Operation Manual - Page 14
Stretch Stitch
 |
View all Bernina Bernette 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Fabric: Spandex, two pieces, 2" x 6" each Needle: 80/12 Universal (Ballpoint may also be used) Needle Position: As programmed BERNINA Presser Foot: Reverse pattern Foot #1/1C/1D bernette Presser Foot: Zigzag/Universal Foot Select the Super Stretch stitch. Place the fabric pieces right sides together. Position the edge of the fabric on the ⅝" marking on the stitch plate; sew the seam and press it open. Note: If the fabric is pulling and stretching as it is sewn, adjust the presser foot pressure to a lower number to lighten the pressure of the foot on the fabric and eliminate the stretching. Stretch Stitch 12/13/10 Do you know how to: ▪ Adjust the presser foot pressure? 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
 |
 |
14
12/13/10
Select the Super Stretch stitch.
Place the fabric pieces right sides together.
Position the edge of the fabric on the
⅝
” marking on the stitch
plate; sew the seam and press it open.
Note: If the
fabric is pulling and stretching
as it is sewn, adjust
the presser foot pressure to a lower number to lighten the
pressure of the foot on the fabric and eliminate the stretching.
Fabric:
Spandex, two pieces, 2” x 6” each
Needle:
80/12 Universal (Ballpoint may also be used)
Needle Position:
As programmed
BERNINA Presser Foot:
Reverse pattern Foot #1/1C/1D
bernette Presser Foot:
Zigzag/Universal Foot
Do you know how to:
▪
Adjust the presser foot pressure?
Stretch Stitch