Bernina Bernette 20 Operation Manual - Page 18

Automatic Buttonholes

Page 18 highlights

Automatic Buttonholes Fabric: Heavy flannel, 6" x 6" and Lightweight tear-away stabilizer, 3" x 6" Needle: 80/12 Universal BERNINA Presser Foot: Automatic Buttonhole Foot #3A bernette Presser Foot: Automatic Buttonhole Foot Note: Models 1008 & activa 210 do not make Automatic Buttonholes. Fold each fabric square in half to 3" x 6"; press. Insert the stabilizer between the layers. Draw a line 1½" from the fold along the 6" length. Automatic Buttonhole-BERNINA ▪ Attach Automatic Buttonhole Foot #3A; set the red slide marker to the length of buttonhole desired. ▪ Position the needle over the drawn line, setting it to stitch the buttonhole perpendicular to the line. ▪ Sew the first bead of the buttonhole; stop when the red mark on the foot aligns with the red slide marker. ▪ Press the Quick Reverse button; this programs the length of the buttonhole. Continue sewing - the buttonhole is completed automatically and the machine will stop when it is finished. This buttonhole is now programmed into the temporary memory. ▪ Move the foot to another place on the drawn line and sew the programmed buttonhole on the second line. There is no need to stop or press Quick Reverse this time as the machine will simply repeat the previous buttonhole and stop automatically. Automatic Buttonhole-bernette 66 and 92c ▪ Position the foot over the first short line, aligning the needle (at the front end of the buttonhole) with the drawn line. • Open the button plate and insert the button. • Lower the buttonhole lever and push it toward the back of the machine. • Stitch the buttonhole; the machine will complete the buttonhole automatically. ▪ When stitching is complete, remove the fabric from under the presser foot. ▪ Bring the thread tails to back and tie off. ▪ Push the lever up when not in use. Note: To make a corded Automatic Buttonhole on bernette models 66 and 92C, follow the directions on the previous page, looping the cord from the back and securing it at the front of the foot. 12/13/10 Do you know how to: ▪ Program a buttonhole? ▪ Make repeat buttonholes? ▪ Open a buttonhole? 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

18
12/13/10
Automatic Buttonholes
Note: Models 1008 &
activa
210 do not make Automatic Buttonholes
.
Fold each fabric square in half to 3” x 6”; press. Insert the stabilizer
between the layers. Draw a line 1½” from the fold along the 6” length.
Automatic Buttonhole—
BERNINA
Attach Automatic Buttonhole Foot #3A; set the red slide marker to
the length of buttonhole desired.
Position the needle over the drawn line, setting it to stitch the
buttonhole perpendicular to the line.
Sew the first bead of the buttonhole; stop when the red mark on the
foot aligns with the red slide marker.
Press the Quick Reverse button; this programs the length of the
buttonhole. Continue sewing – the buttonhole is completed
automatically and the machine will stop when it is finished. This
buttonhole is now programmed into the temporary memory.
Move the foot to another place on the drawn line and sew the
programmed buttonhole on the second line. There is no need to
stop or press Quick Reverse this time as the machine will simply
repeat the previous buttonhole and stop automatically.
Automatic Buttonhole—
bernette 66 and 92c
Position the foot over the first short line, aligning the needle (at the
front end of the buttonhole) with the drawn line.
• Open the button plate and insert the button.
• Lower the buttonhole lever and push it toward the back of the machine.
• Stitch the buttonhole; the machine will complete the buttonhole automatically.
When stitching is complete, remove the fabric from under the presser foot.
Bring the thread tails to back and tie off.
Push the lever up when not in use.
Note: To make a corded Automatic Buttonhole on bernette models 66 and 92C,
follow the directions on the previous page, looping the cord from the back and
securing it at the front of the foot.
Fabric:
Heavy flannel, 6” x 6”
and
Lightweight tear-away stabilizer, 3” x 6”
Needle:
80/12 Universal
BERNINA Presser Foot:
Automatic Buttonhole Foot #3A
bernette Presser Foot:
Automatic Buttonhole Foot
Do you know how to:
Program a buttonhole?
Make repeat buttonholes?
Open a buttonhole?