Binatone iDECT Freedom User Manual - Page 16

4.9.2 Store a Redial Number into the Phonebook 1. Follow Steps 1 and 2 in section 4.9.1. 2. Press and to select ADD TO PB. 3. Press and then enter the name you want to use in the phonebook. 4. Press and then modify the number, if necessary. 5. Press to show . 6. Press to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will only be played when you receive a call if you subscribe to Caller Display and the incoming number matches the stored number.) 7. Press to confirm, and the entry will be stored. 4.9.3 Delete a Redial Number 1. Follow Steps 1 and 2 in section 4.9.1. 2. Press and to select DELETE. 3. Press to confirm, and the entry will be deleted. 4.9.4 Delete all Redial List entries 1. Follow Steps 1 and 2 in section 4.9.1. 2. Press and to select DELETE ALL. 3. Press to display . 4. Press to confirm. All entries will be deleted and the display will show . 4.10 Find the Handset You can locate the handset by pressing the Find button in the middle of the front of the base station. All the handsets registered to the base will produce the paging tone and show "PAGING" on the display for 60 seconds. You can stop the paging by pressing / / on any handset or on the base again. Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging. 4.11 Make an Internal Call (Multi - handset versions only) This feature is only applicable when there are at least two registered handsets or at least one handset and a headset. It allows you to make internal calls, transfer external calls from one handset to another handset / headset and make conference calls. If the called handset / headset is not answered within 60 seconds, the called handset / headset will stop ringing and the calling handset will return to standby mode. Note: If only one handset is registered to the base station, when is pressed, it will display "NOT POSSIBLE". 14