Binatone iDECT Freedom User Manual - Page 35
Freedom System
![]() |
View all Binatone iDECT Freedom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
8.5.8.3 Access Your Answering Machine Remotely You can ring your phone from another tone-dialling phone to switch the answering machine on or off, and/or listen to your messages remotely. 1. Place a call from a tone-dialling phone to your phone. 2. When the answering machine answers the call and starts playing the OGM, press the key. The OGM will stop playing 3. Enter the 4-digit Remote Access PIN (default PIN is 0000). You will hear a single beep if the PIN is accepted, and you will need to press 5 to start playing any messages. If the PIN is not accepted you will hear a triple error beep, and you will need to enter the PIN again. Note: The * must be entered while the OGM is still playing, and the 4-digit PIN should be follow without any delays. Note: If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired function. Freedom System Remote operation 1 Using a tone-dialling phone, dial your home number 2 While your outgoing message is playing, press 3 Key in your remote security code The default code is 0000. For details of how to set a new code, see the User Guide 8.5.8.1 on page 32. Note: The key must be entered while the OGM is still playing, and the 4-digit PIN should follow without any delays. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4 You can also use the codes on the other side of this card Note: If your answering machine is switched off, the phone will enter into the remote access mode after 14 rings. You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. 33
![](/manual_guide/products/binatone-idect-freedom-user-manual-998bfd7/35.png)