Binatone iDECT Freedom User Manual - Page 31

8.5 Answering Machine Settings You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine. 8.5.1 Set the Answer Mode By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select ANSWER MODE. 4. Press and to select ANS & REC or ANSWER ONLY. 5. Press to confirm. When your answering machine memory is full and it is in ANS & RECORD,the answer mode will change to ANSWER ONLY automatically. It will return to ANS & RECORD mode automatically after some messages have been deleted. 8.5.2 Record Your Own Outgoing Message (OGM) You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine answers the call. If your personalised OGM is deleted, the pre-set OGM will be restored automatically. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select OGM SETTINGS. 4. Press and to select ANS & REC or ANSWER ONLY. 5. Press and to select RECORD MESS. 6. Press to start recording your personalised OGM and "RECORDING" is displayed on the screen. 7. Press to stop and save your personalised OGM. Your newly saved OGM will playback automatically. Alternatively, press to return to previous screen without saving the personalised OGM. 29