Binatone iDECT Freedom User Manual - Page 7

2 INSTALLING YOUR PHONE 2.1 Connecting the base station 1. Plug the power supply and the telephone line cord into the base. 2. Plug the other end of the power adapter into a suitable 230Vac mains socket, and the line cord into your telephone line socket. 3. Use only the power adapter and telephone line cord supplied. 2.2 Installing and charging the batteries 1. Place the 2 supplied batteries into the battery compartment with the polarity markings as shown Use only the NiMH rechargeable battery type provided. 2. Position the battery compartment cover over the batteries and slide up to click into place. 3. Put the handset on the base and charge for 15 hours before using the handset for the first time. The handset will give a beep when it is properly placed on the base or charger. 2.3 Installing and charging the wireless headset 1. Attach the ear hook to the headset body as indicated, for either left or right ear operation, according to your preference. Left ear: Right ear: 2. Put the wireless headset on the base cradle for charging before using. The LED on the headset will light red when it is first placed on the charger, and will light blue when it is fully charged. Note: The headset battery is not a user-accessible or replaceable part. If you have a Broadband line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier. 5