Binatone iDECT Freedom User Manual - Page 28
Reset Your Phone, DEFAULT.
![]() |
View all Binatone iDECT Freedom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
7.5.2 To register an additional wireless headset IMPORTANT: The wireless headset is pre-registered when supplied and should not need to be registered. Headset registration is only necessary when you buy a new headset or if it has lost its registration, and the headset LED is purple. Note: Before trying to register a headset to the base station, make sure the base station system PIN code is set to 0000, otherwise you will not be able to register the headset 1. Press and hold VOLUME UP / FLASH [ + ] together with VOLUME DOWN [ - ] to put the headset into registration mode. The LED on the wireless headset will toggle between red and blue. 2. Press and hold on the base station for more than five seconds, to put the base station into registration mode. 3. Place the unregistered wireless headset on the base charging bay. 4. The headset LED will flash blue for about 3 seconds and a long beep tone is generated if the registration is successful. Note: If the headset LED flashes slowly in purple, it means that the headset is registered but the base is not available. 7.6 Reset Your Phone You can reset your phone to the default settings . After a reset, all your personal settings, call list entries, redial list entries, and answering machine messages will be deleted but your phonebook remains unchanged. 1. Press and to select DEFAULT. 2. Press to display PIN?-----. 3. Enter the 4-digit system PIN(default 0000). 4. Press to display CONFIRM? 5. Press to confirm, and the phone will be reset to its default settings. 26
![](/manual_guide/products/binatone-idect-freedom-user-manual-998bfd7/28.png)