Binatone iDECT Freedom User Manual - Page 23

7.2 Alarm Settings You can set an alarm time on this phone. When an alarm is set, the alarm icon < > is shown on the handset display. When the alarm time is reached, the alarm icon< > and "ALARM ON " flash on the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. You can also press and hold while the alarm is sounding, to stop the alarm and turn off the snooze function. Note: a. A key press will still disable the alarm even if the handset keypad is locked when the alarm rings. b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level. c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the < > and "ALARM ON " will still flash. An is reached. alarm tone will be emitted from the earpiece to alert the user the alarm time Once the user presses any key or presses and holds. to disable the alarm, the display will revert to the call duration. d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snooze period. 7.2.1 Turn on/off the Alarm 1. Press and to select HS SETTINGS. 2. Press and to select ALARM. 3. Press and to select ON/OFF. 4. Press to confirm. Note: If ON is selected, you will be asked to set the alarm time. 7.2.2 Set the Alarm Time (If Alarm time is set to be ON) 1. Follow Steps 1 to 4 in Section 7.2.1. 2. Enter the alarm time in24 hour format. 3. Press to display "SNOOZE". 4. Press and to select snooze ON or OFF. 5. Press to confirm. 21