Bosch KBD-DIGITAL User Manual - Page 11

IntuiKey Keyboard Controlling Allegiant Series Video Switchers | en 7 2 Controlling Allegiant Series Video Switchers Before you can take control of an Allegiant Video Switcher, you may have to perform a log-on procedure to gain access to the Allegiant Main Control menu to control the switcher. Note: This chapter applies to the KBD-Universal Model only. - The keyboard generates a short, audible "beep" when first entering the Allegiant log-in screen. This beep notifies operators that the keyboard is ready to accept user number and password data. The keyboard may not correctly accept data entered before this beep. - If log-on information is required, the status display requests a USER NUMBER. Enter the number using the keypad and press ENTER. - The status display requests a PASSWORD. Enter the password using the keypad and press ENTER. - If an invalid user number or password is entered, the status display requests the log-on again. - Following a successful log-on, the softkey display shows the Allegiant Main Control menu, as illustrated in - If user log-on is not required, the softkey display shows USER LOGGED ON briefly, then displays the Allegiant Main Control menu. The menu displayed depends on the camera display mode, either four-digit or six-digit. Monitor Camera 123 1234 Allegiant Figure 2.1 Status Display in Four-digit Allegiant Mode Monitor Camera 123 99 1234 Allegiant Figure 2.2 Status Display in Six-digit Allegiant Mode Bosch Security System, Inc. User Manual F.01U.127.291 | 1.93 | 2009.03