Bosch KBD-DIGITAL User Manual - Page 22

18 en | Controlling Allegiant Series Video Switchers IntuiKey Keyboard Error Name Error 53 Switcher Empty Error 55 SEQUENCE Priority Error 56 SEQUENCE Request Error 58 SEQUENCE Request Error 60 PROGRAM Request Error 62 PROGRAM Request Error 63 PROGRAM Request Error 70 Monitor No Allocated to Group Error 71 Step Monitor Required Error 78 Must Enter Alarm Number Error 80 Trunk Not Available Error 81 Satellite Trunk Seized Error 89 Internal Stack Error Error 90 Keyboard Entry Undefined Error 92 Keyboard Entry Out of Range Error 94 Keyboard Entry Invalid Error 95 Keyboard Entry Incomplete Error 96 * (STAR) Undefined Error 128 No Communications Description The user has attempted to control a sequence using the NEXT, PREV, RUN, or HOLD keys, without there being a sequence loaded. The switcher sequence being requested or cleared requires monitors that are in use by a user of equal or higher priority. Contact a user with higher priority or have the system administrator clear the monitors in question. The user has attempted to load a sequence that is being edited in the PROGRAM mode. Once editing is complete, the sequence may be loaded. The sequence being requested is a relative sequence, and the user is only permitted access to absolute sequences. The user has attempted to program a sequence that is currently running. The sequence must first be stopped before any editing can be performed. The user has attempted to program a new sequence when the sequence memory space has been depleted. Delete unused sequences, then program the new sequence. Another user is already programming a sequence on this monitor. This monitor cannot be used for alarm operations; it has not been designated as alarm-capable by the system programmer. A group of alarm monitors may not have an armed Review (display) monitor without having armed Step (sequence) monitors. A specific alarm number must be entered when arming or disarming an alarm. An attempt was made to access a remote camera connected to a satellite system, but no unused trunk lines are currently available. The camera currently viewed has changed because an operator with a higher priority has selected a different camera that seized the trunk line from the satellite. A stack overflow within the system has occurred. Report this to the manufacturer. The keyboard entry is not defined. Check the appropriate section of the instruction manual for the desired operation and try again. The data entered for a valid command was not in the permissible range. Check the appropriate section of the instruction manual for acceptable ranges for the command in question and try again. An invalid character was received from the keyboard. Usually this indicates a communications error. Verify that the keyboard-tosystem cable is not producing an intermittent connection. The control sequence sent from the keyboard was incomplete. Usually this indicates a communications error. Verify that the keyboard-to-system cable is not producing an intermittent connection. The * key has been pressed, but there is no definition for this button. The keyboard cannot communicate with the Allegiant. F.01U.127.291 | 1.93 | 2009.03 User Manual Bosch Security System, Inc.