Bosch KBD-DIGITAL User Manual - Page 14
Alarm Control, Arm/Disarm Alarm, Arm/Disarm All Alarms, Arm Monitor, Disarm Monitor - software
![]() |
View all Bosch KBD-DIGITAL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10 en | Controlling Allegiant Series Video Switchers IntuiKey Keyboard Alarm Control Alarm commands control the system's automatic video switching capabilities in response to alarm signals activated in the Allegiant system. The camera activated by an alarm is normally the same as the alarm number, but this relationship can be changed using the optional LTC 8059/00 Master Control Software for Windows® or the optional LTC 8850/00 Graphical User Interface software package. These optional software packages even permit up to four (4) cameras to be alarmed by a single alarm input. Exit Arm Alarm Arm All Alarms Arm Monitor Disarm All Alarms Disarm Monitor Figure 2.5 Alarm Control Menu - Arm/Disarm Alarm To arm/disarm an individual alarm on the monitor currently controlled by the keyboard: a. Press the Arm/Disarm Alarm softkey. The status display changes to the following: b. Enter the alarm number to be armed/disarmed, using the numeric keypad. c. Press ENTER. - Arm/Disarm All Alarms To arm/disarm all alarms on the currently controlled monitor, simply press the Arm/Disarm All Alarms softkey. - Arm Monitor Press the Arm Monitor softkey to arm the monitor currently controlled by the keyboard, permitting cameras for armed alarms to automatically display when an alarm occurs. NOTE: Alarm video appears on a given monitor only if the monitor is armed and the alarm is armed for that monitor. The on-screen monitor status display shows MA (Monitor Armed). - Disarm Monitor Pressing the Disarm Monitor softkey disarms the monitor currently controlled by the keyboard, thus prohibiting the monitor from responding to alarms. F.01U.127.291 | 1.93 | 2009.03 User Manual Bosch Security System, Inc.
![](/manual_guide/products/bosch-kbddigital-user-manual-ebf4c4b/14.png)