Bosch KBD-DIGITAL User Manual - Page 32

28 en | Controlling System4 Video Multiplexers IntuiKey Keyboard 4.2 4.2.1 Programming/Controlling MUX Functions Password Entry If a password is required by the multiplexer on-screen display, you must press ENTER after each number entered for the password (e.g. if the password is 1-2-3-4, you then press 1, then ENTER, 2, then ENTER, etc.). 4.2.2 i Exit Full Screen Quad Screen Multi Screen Select Cameo Segment Sequence Toggle VCR Text Mode Record Play ZOOM Freeze Recorder Controls Camera Control MUX Control Figure 4.2 System4 MUX Main Control Menu MUX Main Control Menu Command Descriptions The MUX Main Control menu, displayed on the softkey display, uses the softkey buttons to execute commands or to gain access to other submenus for additional programming/ configuration. Detailed command descriptions follow. Refer to the Multiplexer Instruction Book for additional information. Exit Exits one menu and returns to the main menu for the particular function being programmed. Full Screen Select Full Screen Camera Mode by pressing the Full Screen softkey. The camera currently selected by the keyboard will be displayed in full screen on the monitor. Quad Screen Divides the screen into four separate areas. Enable Quad Screen Mode by pressing the Quad Screen key once. Pressing the key additional times cycles through different viewing configurations. Multi Screen Enables multiscreen displays. The capabilities of the multiplexer model under control determine the available configurations. - 6-channel: 5+1 - 9-channel: 4+3, 3x3 - 16-channel: 4+3, 8+2, 12+1, 3x3, and 4x4 NOTICE! Pressing the multiscreen softkey multiple times cycles through the possible selections. F.01U.127.291 | 1.93 | 2009.03 User Manual Bosch Security System, Inc.