Bosch KBD-DIGITAL User Manual - Page 31

IntuiKey Keyboard Controlling System4 Video Multiplexers | en 27 4 4.1 i Controlling System4 Video Multiplexers This section applies to KBD-Universal and KBD-Digital Models. Accessing the MUX Main Control Menu 1. Press PROD to put the keyboard in the Product Selection Mode. The softkey display shows the Product Selection menu. Depending on the number of devices that are connected to the IntuiKey, the list may show up to 32 total devices spanning 3 menu screens. 2. Press the softkey button adjacent to the desired multiplexer in the display. The softkey display menu will change to the top level menu associated with the device. NOTICE! If you are already in a product sub-menu, and multiple products are connected to the IntuiKey, the keyboard provides a means for easy switching between the devices. Press and hold the PROD key for longer than 1 second to enter the device address selection mode. Enter the address of the desired device to make the keyboard immediately switch to that device's main menu. 3. The status display shows the MUX mode display. VCR Seq MONA Rec Play Zoom ALM 13 Camera 12 MUX#01 Figure 4.1 System4 Mode Status Display Display Description VCR Indicates that the multiplexer is in a VCR test mode (routing the VCR video being recorded to the monitor). SEQ Indicates that the multiplexer is running a sequence. MONA/B Indicates which multiplexer monitor is currently under control. It toggles between MONA and MONB for each press of the MON key. Indicates that the multiplexer is in an action alarm mode. Indicates that the multiplexer is in a contact activated alarm mode. REC PLAY ZOOM ALM xx Indicates that the VCR is currently recording. Indicates that the multiplexer is displaying a videotape replay. Indicates that the multiplexer is displaying a zoomed image. Indicates that a device connected to the IntuiKey, with address number xx is in alarm. The IntuiKey's ALARM button light and the keyboard begins to beep. NOTICE! While in multiplexer control mode, the product title continuously displays MUX #- (where the dash represents the multiplexer number). The numeric entry cell is used to enter i numeric values needed to control the multiplexer (i.e. camera number, allplex number, shot number, etc.). Above the numeric entry cell is a title displaying the multiplexer's current mode (i.e. cameo, camera entry, or menu mode). 4. The softkey display show the MUX Main Control menu. Bosch Security System, Inc. User Manual F.01U.127.291 | 1.93 | 2009.03