Bose A20 Aviation Owner's guide - Page 15

Connecting the headset to the aircraft

Get Bose A20 Aviation PDF manuals and user guides View all Bose A20 Aviation manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 PREPARING THE HEADSET FOR USE Connecting the headset to the aircraft The Bose® A20™ Aviation Headset can be configured to either plug into aircraft power or rely entirely on battery power. Using the 6-pin plug A single 6-pin plug inserted into the 6-pin connector provides the headset with aircraft power and intercom audio. If your headset is aircraft-powered, a 6-pin connector must be installed and mounted to an aircraft panel. See "Mounting the aircraft panel connector" on page 31. Note: An adapter is available from Bose to convert a 6-pin connector to a dual G/A plug for additional connection flexibility. To connect the headset 1. Align the 6-pin plug to the connector keyway by matching the narrow bar on the plug to the slot on the connector. 2. Firmly press the plug into the connector jack. Align keyway Push plug in To disconnect the headset 1. Pull back on the sleeve near the end of the 6-pin plug. 2. Gently continue pulling back to remove the plug from the connector. CAUTION: Do not pull the connector out without first pulling back the sleeve. Forcing the connector out will damage the cable and/or the aircraft instrument panel. Pull sleeve back, then pull plug out Sleeve 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
11
Tab 6, 14
English
Tab 2, 10
Tab 3, 11
Tab 4, 12
Tab 5, 13
Tab 8, 16
Tab 7, 15
P
REPARING
THE
H
EADSET
FOR
U
SE
Connecting the headset to the aircraft
The Bose
®
A20™ Aviation Headset can be configured to either plug into aircraft
power or rely entirely on battery power.
Using the 6-pin plug
A single 6-pin plug inserted into the 6-pin connector provides the headset with
aircraft power and intercom audio.
If your headset is aircraft-powered, a 6-pin connector must be installed and
mounted to an aircraft panel. See “Mounting the aircraft panel connector” on
page 31.
Note:
An adapter is available from Bose to convert a 6-pin connector to a dual
G/A plug for additional connection flexibility.
To connect the headset
1.
Align the 6-pin plug to the connector keyway by matching the narrow bar
on the plug to the slot on the connector.
2.
Firmly press the plug into the connector jack.
To disconnect the headset
1.
Pull back on the sleeve near the end of the 6-pin plug.
2.
Gently continue pulling back to remove the plug from the connector.
CAUTION:
Do not pull the connector out without first pulling back the sleeve.
Forcing the connector out will damage the cable and/or the aircraft instrument panel.
Align keyway
Push plug in
Pull sleeve back, then pull plug out
Sleeve