Bose A20 Aviation Owner's guide - Page 23
Using the headset, with a, enabled phone - headset light flashing
View all Bose A20 Aviation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 USING THE HEADSET Using the headset with a Bluetooth®-enabled phone Pairing the headset with your phone Pairing entails having the Bose A20 Aviation Headset in pairing mode, setting your Bluetooth-enabled phone to "discover" the headset, then confirming the connection on the phone. Before you use your Bose® A20™ Aviation Headset with your mobile phone, you must pair the two devices. 1. Turn on the headset and make sure the multifunction switch is in the top or middle position, NOT in the emergency off position. Power indicator light Multifunction Switch Power button Top position Middle position The power indicator light glows green or yellow, depending on the charge level of the battery. If the light is red, the battery is low and needs replacing. 2. Press the Bluetooth function button (to activate Bluetooth. If this is the first time you've activated or are attempting to pair Bluetooth, the Bluetooth indicator will flash at a slow rate alternating with the Power indicator. This indicates that the headset is in "discoverable" mode and ready to be paired to a cell phone. Bluetooth indicator If the Bluetooth indicator does not flash alternately with the Power indicator flash or you are trying to pair a headset that has previously been paired with another phone, you will need to press and hold the Bluetooth function button for 5 seconds in order to put the headset into "discoverable" mode. 3. With your Bluetooth-enabled phone turned on, locate the Bluetooth feature, usually under Tools, Connect, or Bluetooth Devices. (Refer to the owner's instructions that came with your phone for further details.) 4. Set the phone to "discover" or "add" a Bluetooth device. When Bose A20 appears in the list of devices, select and confirm this choice. 5. If you are asked for a passkey or PIN, enter the digits 0000. The control module Bluetooth and power indicators flash together to confirm successful pairing. If pairing is unsuccessful, repeat steps 3 - 5 above. 19