Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 131
When a split is not made
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press . Curve A pattern with curves is programmed. Be sure to press will be round. for a split at corner points C or E. If a split is not made, the corner When a split is made When a split is not made More intermediate points such as points B, D, F or G will create smooth curves. Programming 1. Press . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 130 Programmer
130
Programmer
Chapter 3 Programming with Command Function
Saving
1.
Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1.
Press
.
Curve
A pattern with curves is programmed.
Be sure to press
for a split at corner points C or E. If a split is not made, the corner
will be round.
When a split is made
When a split is not made
More intermediate points such as points B, D, F or G will create smooth curves.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.