Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 33
Inputting the end code, Create the program to point E.
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Programming with Help Function 5. Input the stitch length and press . 3.0 mm is input in the example. Input 030 to make the stitch length to 3.0 mm. 6. Move the work clamp with . Press when the needle point is at point B of the pattern. 7. Repeat step 6 and create the program to point C. 8. When point C is programmed, press again. Point C becomes a corner and is programmed. To change the stitch length, press for resetting. 9. Create the program to point E. 10. When point E is programmed, press again. 11. Create the program to point I. 12. When point I is programmed, press again. 13. Press twice. Inputting the end code 1. Select with and press . 2. Select the end code type with . and press "111" is selected in the example. Press and the work clamp returns to the first stitch (point A). 3. Press . The work clamp returns to the home position. 32 Programmer