Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 151
Adding sewing point before the first stitch
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Chapter 3 Programming with Command Function 4. The needle point moves to 1'. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press . Adding sewing point before the first stitch A point is added before the current sewing point to change the sewing start position. The example in the left is used for explanation of changing the sewing start position from 1 to 1'. Calling data 1. Specify the program number on the operation panel and press the read/write switch to read the data. Moving to position 1. 1. Press and press . The work clamp moves to the start position. 150 Programmer
150
Programmer
Chapter 3 Programming with Command Function
4.
The needle point moves to 1'.
Saving
1.
Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1.
Press
.
Adding sewing point before the first stitch
A point is added before the current sewing point to change
the sewing start position.
The example in the left is used for explanation of changing
the sewing start position from 1 to 1'.
Calling data
1.
Specify the program number on the operation
panel and press the read/write switch to read
the data.
Moving to position 1.
1.
Press
and press
.
The work clamp moves to the start position.