Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 204
Table of condition number, Machine operation mode, Standard input
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Chapter 4 Extended Option Output Table of condition number Select and input the number for output conditions, enabling conditions and disabling conditions from the following: Machine operation mode Condition No. Operation meeting the condition 1 After a feed is complete at the home position 2 After a feed is complete at the sewing start position (at escape point, if applicable) 3 Before sewing or a test feed is started from the sewing start position (or the start position) 4 Before the machine upper shaft starts rotating at the first stitch 5 Before a test feed is started at the first stitch 6 After sewing or a test is complete (before moving to sewing start position or escape point) 7 After an emergency stop is reset 8 After a step back is started 9 Before halfway sewing is started 10 After the lower thread counter changes from 1 to 0 and the lower thread needs to be replaced 11 After the lower thread is replaced 12 After a program is started 13 After a program is complete 14 When a trigger data is detected during sewing 15 After an emergency stop occurs 16 After a thread breakage occurs 17 After a program is changed 18 After the power switch is turned on 19 After a low air pressure error is detected 20 Before movement to the next start position on completion of sewing in the split mode 21 After completion of sewing in the split mode and movement to the next start position Standard input Condition No. Operation meeting the condition 25 When the foot pedal is effective (before the work clamp moves up or down) 26 When the start pedal is effective (before starting operation) Programmer 203