Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 93
Input the stitch width and stitch length, then press, Select the type of zigzag stitch and press
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 2 Programming with Help Function 2. Select the type of zigzag stitch and press . 3. Input the stitch width and stitch length, then press . Zigzag width Zigzag pitch 4. Move the needle with Press for selection. , then press . Remaining plot count Distance from the previous point in the direction of X or Y axis 5. Press twice at the sewing end position. Check that both values are 0.00 mm 92 Programmer
92
Programmer
Chapter 2 Programming with Help Function
2.
Select the type of zigzag stitch and press
.
3.
Input the stitch width and stitch length, then press
.
4.
Move the needle with
, then press
.
5.
Press
twice at the sewing end position.
Press
for selection.
Zigzag pitch
Zigzag width
Remaining plot count
Distance from the previous point
in the direction of X or Y axis
Check that both values are
0.00 mm