Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 188
Copying a pattern resized, Used to input magnification in the Y direction.
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Chapter 3 Programming with Command Function 6. Input the stitch length in 3 digits and press . If the value is "000", the stitch count remains unchanged. The stitch length increases or decreases. Copying a pattern resized Command to be used Copying a pattern resized in the X and Y directions Used to input magnification in the X direction. Used to input magnification in the Y direction. This function is available only when the needle is at the home position. The copied data is linked to the original data with a split data. 1. Make sure that the needle is at the home position. Press if the n the needle is not at the home position. 2. Determine the reference point for resizing with . 3. Input . 4. Input the magnification in 3 digits in the X direction and press . Magnification values of 0 - 400 are available for input. Programmer 187