Brother International BAS-311F-0 Programmer Instruction Manual - English - Page 82
Moving in parallel, Saving, Ending program, the left
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Moving in parallel 1. Select with and press . 2. Select with and press . Chapter 2 Programming with Help Function 3. Move the work clamp with and press when the needle point is at 2". 4. Press three times. Saving For details of operation, refer to "Writing data to a floppy disk" (P.216). 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . Ending program 1. Press . Start 2 4 Feed 6 Feed 6'' 1 Pattern A 3 3'' 5 Pattern B Pattern C When the movement in parallel is carried out in the midst of the stitch data (position 6 between 2 and 3 in an example on the left), the movement in parallel reaches the start point of the next feed (position 3). If the moving distance in parallel is 12.7 mm or less, the movement in parallel carried out in the stitch data and if the distance is more than 12.7 mm, the movement in parallel is done in the feed data. Programmer 81