Brother International BES-1210AC Instruction Manual - English - Page 14
Adanger
View all Brother International BES-1210AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Installation A DANGER Embroidery machines should be installed only by trained engineers. Electric wiring should be laid by your 0 distributor or electric experts. A machine weighs more than 195 kg. 0 Installation should be carried out by 4 or more workers. Do not connect the power source until installation is completed. Doing so may start the machine unintentionally through an accidental activation of the START switch, resulting in bodily injuries. Install a machine in a place away from a highfrequency welding machine or other machines that may generate a strong electric noise. Failure to do so may cause the embroidery machine to malfunction. Establ ish grounding as designated. Improper grounding may result in an electric shock. * After installation is completed, get the power supply from a dedicated outlet. * When connecting multiple machines, exercise care not to exceed the capacity of the outlet. 2-1. Transportation of machines When holding the machine, be sure to hold the machine body (frame). NOTE: Do NOT hold the table or the guard bar. 2-2. Installation of machines 1. Secure the four level adjusters 0 so that the upper surface of the table is horizontal. 2. If the table wobbles, loosen the four nuts @ and turn the four level adjusters 0 to adjust. When moving the machine, lift the four level adjusters 0 so that the machine can be moved by the casters @ on the machine body. 4 BAS-416A • BES-1210AC