Brother International BES-1210AC Instruction Manual - English - Page 4
Danger
View all Brother International BES-1210AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
El Notes on safety Ail DANGER A\ Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury. A CAUTION Installation ® Machine installation should only be carried ® out by a qualified technician. 0 Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. 0 The sewing machine weighs more than 195 kg. The installation should be carried out by two or more people. Ssol Do not connect the power cord until installation is complete, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. 0 Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock. Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Avoid setting up the sewing machine near sources of strong electrical noise such as high-frequency welding equipment. If this precaution is not taken, incorrect machine operation may result. Sewing ® A ® A This sewing machine should only be used by operators who have received the necessary training in safe use beforehand. The sewing machine should not be used for any applications other than sewing. Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. • When threading the needle • When replacing the bobbin and needle • When not using the machine and when leaving the machine unattended A 0 Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. If an error occurs in machine operation, or if abnormal noises or smells are noticed, immediately turn off the power switch. Then contact your nearest Brother dealer or a qualified technician. If the machine develops a problem, contact your nearest Brother dealer or a qualified technician. II BAS-416A • BES-1210AC